Zľava 15 %
Predajná cena €12.572,94 Bežná cena €14.791,70Základná cena
Zľava 15 %
Predajná cena €15.814,80 Bežná cena €18.605,65Základná cena-
Zľava 15 %
Predajná cena €19.193,21 Bežná cena €22.580,25Základná cena
-
Zľava 15 %
Predajná cena €21.180,81 Bežná cena €24.918,60Základná cena
Zľava 15 %
Predajná cena €26.541,76 Bežná cena €31.225,60Základná cena-
Zľava 15 %
Predajná cena €28.387,75 Bežná cena €33.397,35Základná cena
Zľava 15 %
Predajná cena €31.836,96 Bežná cena €37.455,25Základná cena-
Zľava až 15 %
Tlaková tryskacia kabína BNP-721 so 100-litrovou tryskacou nádobou, MBX-1500/2000, 2 varianty filtra
Predajná cenaO spoločnosti €31.836,96 Bežná cena €37.455,25Základná cena
Clemco pressure blast cabinets in our product line
Clemco pressure blast cabinets combine a closed-cabinet system with the powerful blast cleaning process. This makes them suitable for applications requiring high material removal rates, intensive cleaning, or reproducible surface finishes. The product line includes more compact Pulsar models and larger BNP industrial systems.
Pulsar II through Pulsar VI Plus
The Pulsar II and Pulsar III feature a 20-liter blast pot and a cyclone with a capacity of 8.4 m³/min. The Pulsar VI and VI Plus feature a 40-liter blast pot and a cyclone with a capacity of 16.8 m³/min. Depending on the model, boron-carbide or tungsten carbide blast nozzles are installed. The Pulsar VI Plus expands the filtration technology to two filter cartridges and is thus designed to handle correspondingly higher dust loads and operating demands.
BNP Pressure Blast Cabinets for Larger Applications
The BNP models 65, 220, 601, and 721 are equipped with 100-liter blast chambers and 900-CFM cyclones. They are designed for industrial applications and differ primarily in booth size and filter configuration. The BNP-721 offers a choice of two filter variants. When selecting the size, in addition to the workpiece itself, sufficient space for turning and secure positioning should be taken into account.
Why Abrasive Blasting?
In pressure blasting, the abrasive media is metered directly from a pressurized container into the compressed air stream and conveyed to the nozzle. Compared to the suction blasting method, this provides higher abrasive media and removal rates. This is particularly advantageous for removing stubborn coatings, corrosion, scale, or in applications requiring high surface coverage rates.
Abrasive Reconditioning and Filtration
As usage increases, dust, abrasion residue, and broken grains accumulate in the abrasive media circulation system. The cyclones help separate these fine particles from the reusable abrasive media. The cartridge filters capture the dust generated during blasting and help maintain good visibility in the work area. Regular checks of filter condition and abrasive media quality help ensure a stable process.
Select by Application
✅ Pulsar models for compact to medium-sized workpieces
✅ BNP Series for larger industrial applications
✅ Cyclone performance suited to the abrasive circulation system and operating time
✅ Filter systems tailored to dust volume and usage
✅ Select the nozzle and compressor together
The nozzle and abrasive media determine the result
The nozzle bore significantly affects air consumption and achievable surface coverage rates. At the same time, the hardness, shape, and grit size of the abrasive determine the extent to which a surface is removed or roughened. Even with a high-performance pressure blast cabinet, sensitive materials should therefore be tested using appropriate parameters and, if necessary, on a test area.
Match the compressor to the piping system
The actual performance of a pressure blast cabinet depends largely on the compressed air supply. The nozzle bore, operating pressure, and available compressor free air delivery must be properly matched. In addition, pressure losses in pipes, compressed-air treatment systems, and couplings should be taken into account. A compressor that is too small limits performance regardless of the size of the blast pot.
Keep an eye on operation and wear and tear
Higher blasting power also places greater strain on the nozzle, hose, interior, and abrasive media. Wear parts should therefore be inspected regularly. Replacing the nozzle in a timely manner helps keep air consumption and the blast pattern within the intended range.
Selecting the Right Clemco Pressure Blast Cabinet for Your Technical Needs
When making a selection, the workpiece size, daily operating time, desired removal rate, abrasive media, filtration requirements, and available compressed air must all be considered together. We provide support in the technical design of a suitable Clemco pressure blast cabinet and in the coordination of the entire system.
