Nem találhatók termékek
High-vacuum extraction: high negative pressures for localized extraction
High-vacuum extraction differs fundamentally from conventional extraction systems that handle large volumes of air. It operates with comparatively small flow rates and high negative pressures. This allows dust, chips, and other particles to be transported at high flow velocities through hoses and pipes with small diameters. This is particularly advantageous when extraction is required directly at the tool, on a machine, or at a small intake opening.
The high-vacuum extraction sector includes central high-vacuum extraction systems, mobile industrial vacuum cleaners, hose reels, pipe and hose systems, various capture elements, and accessories for connection, filtration, and discharge. Depending on the system design, a single workstation or an entire network of multiple extraction points can be served.
When is high-vacuum extraction appropriate?
Typical Applications
✔ Extraction directly at grinding and machining tools
✔ Machine extraction systems with small connection diameters
✔ Centralized supply to multiple workstations
✔ Industrial cleaning via hose and pipe networks
✔ Collection of dust and chips near the source
✔ Applications with longer hose runs and high flow resistance
High Vacuum vs. Low Vacuum
| Feature | high-vacuum extraction | Conventional low-vacuum extraction system |
|---|---|---|
| Negative pressure | high | relatively low |
| flow rate | relatively small | relatively large |
| Conductor cross-sectional area | smaller | larger |
| Typical data entry | tool- and point-specific | Hoods, arms, tables, surface coverage |
| Typical Applications | Tools, Machinery, Cleaning | Air Purification for Larger Coverage Areas |
The Correct Interpretation
When sizing a system, it is not sufficient to consider only the maximum vacuum of a suction unit. The decisive factors are the vacuum level and the flow rate available at the most unfavorable actual extraction point in operation. Pressure losses result from hose and pipe lengths, elbows, branches, fittings, filters, and capture elements.
Here’s what you should keep in mind during the planning phase
✔ Number of extraction points in use simultaneously
✔ Required airflow per collection point
✔ Required vacuum pressure at the farthest point
✔ Pipe and hose diameters as well as line lengths
✔ Type, quantity, and properties of the material to be extracted
✔ Filtration technology and intended discharge
✔ Possible system expansions
✔ ATEX requirements for combustible dusts
Pipe Network and Hose System
In high-vacuum systems, the flow velocity in the lines is particularly important. Cross-sections that are too large can reduce the transport velocity, while cross-sections that are too small can significantly increase pressure loss. Therefore, diameters, line lengths, and the number of simultaneous extraction points should be considered together.
Filtration and Discharge
The filtration technology must be suited to the material being extracted and the operating conditions. Fine dust poses different challenges than coarse chips or heavy particles. The type of filter cleaning and the method for emptying the collected material also influence maintenance requirements and system availability.
ATEX and Combustible Dusts
When dealing with combustible dusts, a single ATEX component is not sufficient. The entire application must be evaluated. This includes potential ignition sources, grounding and equipotential bonding, filters, the extraction unit, the piping system, discharge, and the specific operating conditions.
FAQ
What does “high vacuum” mean in the context of an extraction system?
This refers to a system that operates at higher negative pressure and with lower air volumes than typical low-vacuum extraction systems.
Is high vacuum always more powerful than standard extraction?
No. These are different airflow concepts for different tasks. For large-area coverage, high air flow rates are often more important than high negative pressure.
Can a high-vacuum extraction system serve multiple workstations?
Yes, provided that the system and piping network are designed to handle the number of workstations in operation simultaneously.
Why are pipe diameters so important?
They affect both the flow rate and the pressure drop, and thus the performance at the extraction point.
Can high-vacuum extraction be used for combustible dusts?
In principle, only with a comprehensive solution that is suitable and appropriately rated for this purpose. The specific hazard situation must be taken into account.
Planning a High-Vacuum System Correctly
To assist with preliminary selection, please provide information on the material to be extracted, the number of workstations, hose and pipe lengths, connection diameters, and the desired operating mode. This allows the system to be sized much more reliably.
