Jusqu’à 11 % de remise
Prix de vente €2.997,25 Prix normal €3.367,70Prix de base-
Jusqu’à 11 % de remise
Prix de vente €3.156,12 Prix normal €3.546,20Prix de base
Jusqu’à 11 % de remise
Prix de venteÀ en juger par €3.367,94 Prix normal €3.784,20Prix de base
Jusqu’à 11 % de remise
Prix de venteÀ en juger par €3.526,80 Prix normal €3.962,70Prix de base
Jusqu’à 11 % de remise
Prix de venteÀ en juger par €4.054,23 Prix normal €4.555,32Prix de base
Jusqu’à 11 % de remise
Prix de venteÀ en juger par €4.142,14 Prix normal €4.654,09Prix de base
Jusqu’à 11 % de remise
Prix de vente €5.048,73 Prix normal €5.672,73Prix de base
Jusqu’à 11 % de remise
Prix de vente €5.364,34 Prix normal €6.027,35Prix de base
FR Series on Air Receivers
Belt-driven rotary screw compressors with air receivers connect the compressor unit to a compatible air receiver. The FR series in the current product lineup ranges from 3 to 22 kW and, depending on power output, is configured with either a 270-liter or 500-liter air receiver.
270 liters for compact performance levels
The 3- and 4-kW models are available with 270-liter air receivers. For the 5.5, 7.5, 11, and 15 kW models, 270 or 500 liters are available, depending on the model. This allows the storage capacity to be adapted to the installation site and system configuration.
500 liters for the larger FR models
The 18.5- and 22-kW models in the current product line are equipped with 500-liter tanks. At 8 or 10 bar, they deliver up to 3.1 and 3.6 m³/min, respectively. The tank serves as a compressed air buffer and can smooth out short-term fluctuations in consumption.
Flow rate from 0.38 to 3.6 m³/min
The FR series starts at 0.38/0.46 m³/min with 3 kW. The range extends from 5.5 and 7.5 kW up to 1.4/1.6 m³/min at 11 kW, 1.9/2.3 m³/min at 15 kW, and finally 3.0/3.6 m³/min at 22 kW. This allows the performance to be fine-tuned relatively precisely to the specific application.
Select a FR Compressor
✅ Compare flow rate at the desired pressure
✅ Select 8 or 10 bar to match the network
✅ Take into account vessel capacities of 270 or 500 liters
✅ Check whether a separate refrigerated air dryer is needed
Containers are no substitute for proper sizing
A larger air receiver can buffer peaks, but it cannot compensate for a compressor that is permanently undersized. If the consumers continuously require more air than the compressor supplies, the receiver pressure will drop despite the larger storage volume. Therefore, the required continuous flow rate remains the key selection criterion.
Buy a rotary screw compressor with an air receiver
This category is intended for users who are looking for a compact combination of a rotary screw compressor and an air receiver but do not need an integrated refrigerated air dryer. A separate subcategory is available for complete stations with drying.
