Hasta un 5% de descuento
Precio de ventaAb €3.696,74 Precio normal €3.891,30Precio base
Hasta un 5% de descuento
Precio de ventaAb €4.307,21 Precio normal €4.533,90Precio base
Hasta un 5% de descuento
Equipo de chorreado JOS de 24/60/100 litros, комплектo completo
Precio de ventaAb €4.855,50 Precio normal €5.111,05Precio base
Hasta un 5% de descuento
Equipo de chorreado a baja presión de 24 litros con cabezal de chorro giratorio, комплектo completo
Precio de venta €4.986,07 Precio normal €5.248,50Precio base
Hasta un 5% de descuento
Precio de ventaAb €5.307,70 Precio normal €5.587,05Precio base
Hasta un 5% de descuento
Equipo de chorreado a baja presión de 60 litros con cabezal de chorro giratorio, комплектo completo
Precio de venta €5.608,98 Precio normal €5.904,19Precio base
Hasta un 5% de descuento
Equipo de chorreado a baja presión de 100 litros con cabezal de chorro giratorio, комплектo completo
Precio de venta €5.608,98 Precio normal €5.904,19Precio base
Radler & Ruf: How to Choose the Right Low-Pressure Blasting Machines
Radler & Ruf low-pressure blast machines are designed for applications in which the blasting power needs to be finely adjusted to the surface, the abrasive media, and the cleaning task. The decisive factor is not just the tank size, but the interplay of working pressure, nozzle bore diameter, abrasive media, hose size, and available compressed air volume.
Here’s what you should look for when making your selection:
✔ Desired tank size and operating duration
✔ Available compressor power ratings
✔ Desired nozzle bore diameter
✔ Type and grit size of the abrasive media
✔ Sensitivity of the surface to be treated
✔ Desired hose length and mobility
Tank Sizes and Applications
The Radler & Ruf low-pressure blast machines currently available in the store include compact 24- and 60-liter models as well as a larger series with capacities of 100, 140, or 200 liters. Smaller tanks are particularly suitable for mobile applications, repairs, restoration, and changing work locations. Larger tanks reduce refill intervals and are useful when longer blasting times or larger areas are involved.
Compressed Air Requirements and Blast Nozzle
Air demand is primarily determined by nozzle bore diameter and operating pressure. When sizing the system, the compressor’s actual available flow rate should be taken into account. A sufficient air reserve stabilizes the operating pressure and prevents drops in performance during blasting.
| Selection criterion | Meaning |
|---|---|
| blast pot capacity | Affects refill intervals, mobility, and potential operating time. |
| Working pressure | It is adapted to the surface, the abrasive media, and the desired removal rate. |
| nozzle bore diameter | Significantly determines air consumption and surface coverage rates. |
| abrasive media | Must be suitable for the surface and the desired blasting result. |
Typical Applications
✔ Restoration and historic preservation
✔ Wood and facade finishing
✔ Removal of coatings and contaminants
✔ Rust removal and surface preparation
✔ Mobile blasting operations on construction sites and in industrial facilities
FAQ
What is the advantage of a low-pressure blasting machine?
The working pressure can be specifically reduced so that sensitive surfaces can be processed in a more controlled manner.
What is the appropriate tank size?
This depends on the duration of use, mobility, and desired refill frequency. For short, mobile applications, a smaller tank is often sufficient; for longer jobs, a larger volume is more convenient.
Can I use any type of abrasive media?
No. The abrasive media, grit size, metering valve, and nozzle must be technically compatible with each other and with the respective application.
How important is the compressor?
Very important. Without a sufficient supply volume, the desired working pressure at the nozzle cannot be maintained consistently.
Advice on Radler & Ruf low-pressure blast machines
If you are unsure about boiler size, nozzles, abrasive media, or compressor specifications, we can help you put together a technically suitable system for your application.
