No products found
How to Choose the Right Hose Reel for High-Vacuum Systems
Hose reels ensure that extraction hoses are quickly available at high-vacuum workstations and can be neatly stowed away after use. This not only improves ergonomics but also protects the hose from being pinched, kinked, and subjected to unnecessary abrasion. Especially at frequently used cleaning stations, tool extraction systems, and central vacuum systems, hose reels can significantly simplify daily operation of the equipment.
What is important when it comes to design?
A hose reel must be compatible with the existing high-vacuum extraction system and the specific application. The most important factors are hose diameter, hose length, installation position, retraction system, connection type, and the required radius of movement. In high-vacuum systems, the pressure loss caused by the hose and fittings must not be underestimated. Long lines, small cross-sections, and additional bends increase resistance and can reduce performance at the suction point.
Here’s what you should look for when making your selection
✔ Hose diameter compatible with the system
✔ Sufficient hose length for the work area
✔ Suitable mounting location on a wall, ceiling, or structure
✔ Minimal additional pressure loss
✔ Sturdy guide and reliable retraction system
✔ Compatibility with couplings and existing connections
Typical Applications
Hose reels are frequently used at cleaning stations, in production areas, along machine lines, or in workshops. They are suitable for any location where a flexible suction hose is needed regularly but should not be left lying on the floor permanently. In central high-vacuum extraction systems, multiple reels can be distributed along a pipe network so that different work areas are quickly accessible.
Hose Length and Pressure Drop
The usable hose length should not be longer than necessary. Every additional meter of hose increases flow resistance. This has a significant effect, especially with small hose cross-sections. For a functional design, the system, piping network, hose, and capture element must therefore be considered together.
| Selection criterion | Meaning | Practical Note |
|---|---|---|
| Hose diameter | affects flow and pressure loss | Do not shorten without verification |
| Hose length | determines range and resistance | Keep it as short as possible while remaining meaningful |
| Installation location | determines ergonomics and hose routing | Check the working radius beforehand |
| Withdrawal | affects ease of use | Select based on frequency of use |
Installation and Maintenance
A hose reel should be installed so that the hose can be fed in and out without excessive lateral stress. The condition of the hose, connections, retraction mechanism, and mounting should be checked regularly. Damaged or leaky hoses reduce suction performance and should be replaced promptly.
FAQ
Can any suction hose be used on a hose reel?
No. The diameter, bend radius, length, and hose material must be compatible with the hose reel and the high-vacuum extraction system.
Does a longer hose affect suction power?
Yes. Pressure loss increases with length. This must be taken into account during design.
Where should a hose reel be mounted?
If possible, position it so that the work area is easily accessible and the hose can be routed without unnecessary bends.
Are hose reels also suitable for centralized high-vacuum extraction systems?
Yes. Especially for central systems, having multiple designated outlet points with hose reels is a practical solution.
What should be considered for ATEX applications?
In areas subject to explosion protection requirements, the hose, hose reel, grounding, and the entire system must be compatible with the risk assessment.
Consulting on system design
Not sure which hose diameter, length, or hose reel is right for your high-vacuum extraction system? We’ll help you choose based on your application, connection specifications, and existing system configuration.
