Ordinarie prisFrån €1,43Grundpris
Upp till 5 % rabatt
Upp till 5 % rabatt
FörsäljningsprisFrån €11,76 Ordinarie pris €12,38Grundpris
Upp till 5 % rabatt
FörsäljningsprisFrån €12,77 Ordinarie pris €13,45Grundpris
Rabatterat med 5 %
Försäljningspris €31,88 Ordinarie pris €33,59Grundpris
Rabatterat med 5 %
Försäljningspris €34,37 Ordinarie pris €36,18Grundpris
Blast Nozzles Accessories as Connectors in the Blasting System
A blast nozzle can only operate reliably if the components surrounding the nozzle connection are technically compatible. The nozzle holder, nozzle gasket, blast hose, and, if applicable, hose clamp together form the mechanical connection at the working end of the blasting system. Incorrect sizes or worn components can lead to leaks, pressure losses, or increased local wear.
Select a nozzle holder that fits the blast hose
The nozzle holder is mounted at the end of the blast hose and, in conventional systems, holds the blast nozzle. Therefore, two dimensions must match: the holder must be compatible with the outer diameter of the blast hose being used and, at the same time, have the correct female thread for the nozzle.
The product range includes nozzle holders for various blast hose sizes and connection types. These include systems for 25 mm coarse thread, 50 mm coarse thread, 3/4-inch fine thread, and 1 1/4-inch fine thread. These designations should be carefully verified when replacing an existing holder.
Check nozzle seals regularly
The nozzle gasket is located between the nozzle and the nozzle holder and is a small but important wear part. A damaged or severely compressed gasket can cause the abrasive media stream to reach areas not designed for it. This can result in unnecessary damage to the holder and the nozzle. Therefore, it is always worth checking the gasket when changing the nozzle.
Hose-insert blast nozzles require a different mounting method
Hose-insert blast nozzles do not have a standard screw thread. They are inserted directly into a suitable blast hose and secured with a matching hose clamp. Therefore, with this design, not only the nozzle but also the blast hose and the clamp must be considered as a single unit.
Check before purchasing accessories
✅ Outer diameter of the blast hose
✅ Thread type or connection type of the blast nozzle
✅ Condition of existing nozzle seals
✅ Mounting type for hose-insert blast nozzles
✅ Existing brand and technical system configuration
Check accessories during nozzle replacement and maintenance
When replacing a worn blast nozzle, one should not automatically assume that all adjacent components can still be used. Seals, holders, and the end of the blast hose are also exposed to high levels of abrasive stress. A thorough inspection prevents a new nozzle from being used with connection parts that are already worn.
Select blast nozzles compatible with the system
ABS Strahltechnik carries accessories for professional blast nozzles and is constantly expanding its product range to include additional compatible components. If you’re unsure, details about the nozzle, thread, nozzle holder, and blast hose will help you determine the correct model.
