Običajna cena €2.938,71Osnovna cena
Običajna cena €5.948,81Osnovna cena
Običajna cena €7.138,81Osnovna cena
Običajna cena €8.328,81Osnovna cena
Običajna cena €14.873,81Osnovna cena
Običajna cena €23.740,50Osnovna cena
Select dry ice blasting machines based on compressed air requirements and application
For dry ice blasting machines, the available compressed air flow is a key factor in determining the achievable cleaning performance. The current Dry Ice Energy Champ series covers a very wide range: The Champ Neo starts at just about 150–250 l/min and is designed for particularly mobile applications. Depending on the settings and nozzle, the Champ Basic, Champ, Champ Vario, and Champ Turbo range from a few hundred to around 1,500 or 1,600 l/min. The Champ Turbo PRO requires up to about 3,500 l/min, while the Champ Ultra, with up to 10,000 l/min, is clearly designed for high-performance industrial applications.
Therefore, the selection should not be based solely on maximum blasting pressure. A high-performance unit is of little use if the existing compressor cannot consistently supply the required air volume. Conversely, a smaller, compressed-air-efficient system may be more cost-effective than a large machine for detailed work or mobile applications.
Champ Neo and Champ Basic for compact applications
Weighing about 6.5 kg, the Champ Neo is particularly lightweight and, according to the manufacturer, operates with 150–250 l/min of compressed air at 4–8 bar. This makes it suitable for users who work on the go or want to get started without a large stationary compressed air system. It processes 1.5-mm and 3-mm dry ice pellets and is designed for compact cleaning tasks.
The Champ Basic offers a wider performance range. It is specified with a compressed air requirement of approximately 250–900 l/min, a dry ice consumption of 4–20 kg/h, and a 4.5-liter tank. Typical applications include vehicle care, interior cleaning, and general workshop tasks.
Champ, Champ Turbo, and Champ Vario: Versatile Mid-Range Models
The Champ is positioned as an all-around solution for vehicle detailing and occasional industrial applications. The manufacturer specifies a compressed air flow rate of approximately 400–800 l/min and a dry ice consumption of 7–20 kg/h. The Champ Turbo significantly expands the performance range and is suitable for more demanding cleaning tasks that require higher air flow and greater blasting intensity.
The Champ Vario is particularly useful when the amount of dry ice needs to be adjusted flexibly. With its variable dosing system, the cleaning performance can be better tailored to different types of contamination and surfaces. This is especially useful when both delicate components and more stubborn residues are being processed in the same facility.
Champ Turbo PRO and Champ Ultra for high-performance applications
The Champ Turbo PRO is designed for professional applications with significantly higher air demand. Depending on the configuration, up to approximately 3,500 l/min may be required. The Champ Ultra goes even further: With up to 10,000 l/min of compressed air, operating pressures up to 16 bar, and a 24-liter dry ice tank, it is a system designed for industrial cleaning tasks requiring high surface coverage rates.
Key Selection Criteria
✅ Actual delivery volume of the existing compressor
✅ Desired operating pressure and cleaning intensity
✅ Dry ice consumption and tank size
✅ Mobility, weight, and working radius
✅ The right nozzle for spot, surface, or angled cleaning
✅ Appropriate pellet size and adequate compressed-air treatment
The nozzle and compressed-air line affect the actual performance
The machine alone does not determine the result. Round blast nozzles concentrate the energy, flat blast nozzles distribute the blast over larger areas, and angled nozzles make it easier to work in hard-to-reach places. As the nozzle size increases, the required air flow rate generally increases as well. Therefore, the device, nozzle, and compressor must be considered as a system.
Equally important are properly sized compressed-air hoses and couplings. Cross-sections that are too small, long lines, or unnecessary constrictions cause pressure losses and can result in the equipment receiving significantly less power than the compressor could theoretically deliver.
Dry Ice Quality and Compressed-Air Treatment
Fresh, dense dry ice improves process stability. The longer pellets are stored, the more mass they lose through sublimation. In addition, moist compressed air can lead to operational problems. Water separators, filter regulators, or more advanced compressed-air treatment are therefore an important part of a reliable system, depending on the compressor and operating conditions.
Buy a dry ice blasting machine – first determine the application and compressor
Anyone looking to purchase a dry ice blasting machine should first determine what needs to be cleaned and what compressed air supply is already available. This will help determine the appropriate machine class, nozzle, pellet size, and accessories. ABS Strahltechnik offers the Dry Ice Energy Champ series for mobile, commercial, and industrial applications and provides support in matching the machine to the compressed air supply.
